SP05.10 : Van an toàn vi sinh - SANITARY
Thông số chính:
Van an toàn vi sinh - SANITARY - Sanitary Safety Valve
Tư vấn , Thiết kế , Chế tạo dây chuyền – Thiết bị công nghệ , Hệ thống pha trộn - định lượng được tổng hợp từ các thiết bị công nghệ Bơm - Van - Cảm biến , Thiết bị điều khiển Allen – Bradley (Mỹ)
Hãng cung cấp : 
Model : 

Applications
AQ3 sanitary safety valve is a sanitary stainless steel safety valve, with safety design for equipment protection. It is installed in the discharge pressure loop in order to protect pipelines, pumps, fittings, and tanks, etc.. It is widely used in food, beverage, diary, pharmaceutical and beer industries.

Operating Principle
AQ3 sanitary safety valve calibrates a specific pressure by adjusting the gland nut of the spring. Calibration pressure is a maximum safe pressure value fixed in order to avoid equipment damage. Under normal working pressure, the valve is closed. When the pressure in the pipe system exceeds the calibration pressure, the valve is open. Thus, the pressure in the pipe system is discharged and the pipeline and equipment are protected.

 

AQ3 sanitary safety valve is operated by a handle. AQ3-1 series is an improved version of the AQ3 sanitary safety valve. It is equipped with a pneumatic actuator, which is convenient to carry out CIP cleaning to safety valve and pipelines.

AQ3 sanitary safety valve is a more specialized valve, and it has been checked strictly before delivery. In order to ensure conformity to the actual operation conditions, please check the valve on-site if possible.

Correct Installation Method

Technical Data

Metal material

Product wetted

304L/316L (DIN-1.4307/1.4404)

Non-product wetted

304 (DIN-1.4301)

We can provide EN 10204 3.1B certificate.

Seal material

Standard

EPDM

Options

Silicone, PTFE, FPM, NBR

All seal materials comply with FDA 177.2600.

Temperature

Continuous working temperature

-20°C ~ +135°C (EPDM)

Sterilization temperature

150°C (Max 20min)

Pressure

Base measuring pressure

0~3bar/0~6bar/0~10bar (According to the role of spring)

Control air pressure

5~8bar

Surface treatment

Internal surface

Ra≤0.8µm

External surface

Shot blasting

Connection

Connection standards

Welding end: DIN 11850 series 2

Welding end: Inch pipe diameter standard

Connection methods: welding, thread, clamp, flange