SP05.17 : Van đáy - Van điều khiển - SANITARY
Thông số chính:
Van đáy - Van điều khiển - SANITAR - Tank Bottom Valve
Tư vấn , Thiết kế , Chế tạo dây chuyền – Thiết bị công nghệ , Hệ thống pha trộn - định lượng được tổng hợp từ các thiết bị công nghệ Bơm - Van - Cảm biến , Thiết bị điều khiển Allen – Bradley (Mỹ)
Hãng cung cấp : 
Model : 
 

Applications
GD3 tank bottom valve is a pneumatic seat valve with sanitary and flexible design. Based on the mature single seat valve design platform, few and simple moving components make the valve reliable, and reduce the maintenance cost. GD3 tank bottom valve is used to close or open the pipe leading to the tank. It is widely used in brewing, dairy, beverage, and pharmaceutical industries.

Operating Principle

GD3 tank bottom valve is remote controlled by compressed air, which consists of one valve and one tank bottom flange. In order to reduce the abrasion of seal components, the compression to seal components is performed through touching between metals.

GD3 tank bottom valve has two configurations.

GD3-T tank bottom valve and flange are connected by clamp ends. Loosen the clamp a little, the valve can turn to any position, ensuring high flexibility. Tank bottom flange is welded on the tank.

GD3-F tank bottom valve and flange are connected by bolts. The valve can rotate through 360°. Tank bottom flange is welded on the tank.

 Technical Data

Metal material

Product wetted

316L (DIN-1.4404)

Non-product wetted

304 (DIN-1.4301)

We can provide EN 10204 3.1B certificate.

Seal material

Standard

EPDM

Options

NBR, FPM, Silicone

All seal materials comply with FDA 177.2600.

Temperature

Continuous working temperature

-20°C ~ +135°C (EPDM)

Sterilization temperature

150°C (Max 20min)

Pressure

Working pressure

0~5bar (standard)

Accepting high pressure requirement

Control air pressure

5~8bar

Surface treatment

Internal surface

Ra≤0.8µm

External surface

Shot blasting

Connection

Connection standards

Welding end: DIN 11850 series 2

Welding end: Inch pipe diameter standard

Connection methods: welding, thread, clamp, flange

Options

Smart controller

24V DC

Solenoid valve (1 or 2)

Position sensor

24V DC

NPN/PNP position sensor (2)

Body Configurations